EN-EIC-325-CONN详细介绍

EN-EIC-325-CONN

数字I/O和计数器/计时器卡/板 EN-EIC-325 (ISA Bus) and EN-EIC-325-PCI (PCI Bus)
Four Axis Encoder Interface Cards
EN-EIC-325 (ISA Bus) and EN-EIC-325-PCI (PCI Bus)

Four 24-Bit Up/Down Latch Counters
Each Counter has a Programmable
Set Point Value
Provides the Excitation to the Encoders

产品描述
The Models EN-EIC-325 and EN-EIC-325-PCI Four Axis Encoder Interface Cards accommodate most of the popular optical encoders available. The board supports either square-wave or sinusoidal output encoders, both linear and rotary types. It can be directly connected to up to four encoders and will also provide necessary excitation to the encoders. The card is equipped with four differential inputs for limit or home switches/marker/encoder index and 10(PCI)/11(ISA) single-ended inputs for general use. Also, there are four opto-isolated outputs that may be used for set-points, carry/overflow or index/marker and three opto-isolated outputs for general use. The card has four 24-bit up/down latch counters. Each counter can be programmed for a preset value. There is an internal status register for rapid storing and clearing of signals.

Specifications
EN-EIC-325 and EN-EIC-325-PCI Cards
Number of Encoders: 4 per board
Multiple Encoder Pulses: 1, 2 or 4 (software able)
Encoder Outputs:sinusoidal or square-wave types
Counter Size: 24-bit up/down with latched buffer
Method of Communication with PC Bus:
I/O port addressing, 16 jumper able address ranges (ISA), automatic ion (PCI)
Encoder Inputs:
4 Wave Signal Inputs (one per channel)
Single ended or differential for square wave
Differential for sinusoidal wave 4 Wave Index (Marker) Inputs (one per channel)
Single ended or differential
11 General purpose inputs (ISA)/ 10 General purpose inputs (PCI),
TTL/CMOS compatible Schmidt trigger single-ended

Encoder Outputs:
4 Event signal outputs
Can be set to respond to following events - setpoint, overflow and index/marker
1 Opto-isolated output per channel
3 General purpose opto-isolated outputs

Power
(all supplied from ISA or PCI bus):
+5 V, 200 mA max; +12 V, 100 mA max; -12 V, 50 mA max
Encoder Connectors: mini D-Sub
44 pin (mating connector supplied)
Output Connectors: D-Sub 9 pin
Operating Ambient: 0 to 50°C (32 to 122°F),
up to 80% RH non-condensing
Dimensions:
EN-EIC-325; 153 L x 107 mm W (6.0 x 4.2")
EN-EIC-325-PCI; 129 L x 107 mm W (5.1 x 4.2")
Weight:150 g (5.3 oz)

ENCODER SIGNALS SQUARE-WAVE SIGNAL
Signals: square wave A phase and B phase shifted by 90°,
single-ended or differential
Compatibility: HTL 0.5-5V or TTL compatible
Rate: 500 Kpps max

SINUSOIDAL SIGNALS
Signals: two incremental sinusoidal signals (phase A and B shifted by 90°) differential
Signal Range (Encoder Output):
Impedance:lt;1 K: current output encoders, gt;± 100 μA; voltage output encoders,
gt;± 100 mV for phases A, B and for the reference marker/index pulse
Encoder Excitation: 5 Vdc
Light Source Current: 900 mA total max,
protected by a polyswitch resettable fuse
Rate: 500 Kpps max:

ENCODER COUNTER
Counter: 24-bit up/down counter +24bit latched buffer per counter
Setpoint: independently programmable setpoint for each counter
Buffers: user may freeze the buffers without stopping the counters from counting
Operation: independent operation mode for each axis
Encoder Pulses: single/multiple encoder pulses (1, 2 or 4 - software able)
Counter Reset: counter may be reset when index is reached (software able)
Output (EN-EIC-325, EN-EIC-325- PCI)/Interrupt
(EN-EIC-325 only) Options for each Encoder (independently able):
set-point reached, counter carry flag, index/marker

注: Each card is supplied with one mating connector for the 44 pin encoder input port.

产品编号 产品描述

EN-EIC-325 Four axis encoder interface card for the ISA bus

EN-EIC-325-CONN Extra mating connector for encoder input port

EN-EIC-325-CONN

EN-EIC-325-CONN相关产品
EN-EIC-325-CONN技术文章