可更换式过滤器,室内吊顶空气滤器批发价格
产品特性
◆ 滤网可更换式设计,不需连同箱体更换,降低成本,节省资源
◆ 特殊免用工具滤网固定片,直接从室内更换滤网,安装快速,更换便利
◆ 适用于各型天花板,T-BAR型、库板型、轻钢架型及嵌板型,适用性广阳极处理铝挤型箱体材质,重量仅12KG(FB-C16018-A),方便般运安装。
◆ 三种入风口尺寸及嵌板型可选购不锈钢出风口面板,满足不同客户需求。
◆ 过滤材料采用超细玻纤滤纸,阻力低,风量大,占用空间小。
◆ 每个过滤箱经严格检测。
用途
◆ 用于高洁净度厂房和洁净室的送风系统的终端过滤,有效地确保气流速度和防止涡流。
Replaceable filter-type ceilingProduct Features: 1) The design filter can be replaced, together with the box without replacement, to reduce costs and save resources. 2) The special tool-free filter fixed-film, directly from the interior to replace filters, the installation quick and convenient replacement. 3) applies to all types of ceilings, T-BAR-type, library plate, light steel frame type and plate type, the applicability of a wide box-type anode material aluminum, light weight, easy handling installation. 4) The three kinds of inlet size and optional stainless steel plate out of vent panels, to meet different customer needs. 5) filter material with ultra-fine glass fiber paper, the resistance is low, the wind volume, take up little space. Each factory leak tested to stringent filters.Uses: Suitable for high cleanliness of plant and clean room air supply system of the terminal filter and effectively to ensure the flow speed and the prevention of eddy current
产品优点:效率高、密封好、阻力低,易安装
构成材料表:
项 目 |
材 质 |
箱 体 |
阳极处理铝挤型 |
入风口及上板 |
镀锌铁板 |
气流扩散网 |
冲孔镀锌铁板 |
保温材 |
黑皮保温板(PE t=12.5mm) |
滤 材 |
超细玻璃纤维纸
|
保护网 |
阳极处理铝网
|
接着剂 |
合成树脂
|
气密垫片 |
合成橡胶(RB t=5mm)
|
产品用途:广泛应用于医院的手术室、实验室、制药室、微电子、胶片和光纤设备及食品加工厂等洁净度要求较高的工作环境。
技术参数(搭配HEPA/ULPA)
型号 |
实际尺寸 W×H×D(mm) |
滤材面积 m2 标准风量/高风量 |
效率 EN1822 |
额定风量/初阻力 CMM/PA |
|
标准风量 |
高风量 |
||||
STX-PDK164 |
570×570×180 |
6.52/8.68 |
HEPA |
14.2/250 |
20.9/250 |
STX-PDK167 |
1170×570×180 |
14.29/19.03 |
31.2/250 |
45.9/250 |
|
STX-PDK170 |
600×600×180 |
7.33/9.75 |
15.9/250 |
23.4/250 |
|
STX-PDK173 |
1210×600×180 |
15.71/20.91 |
34.3/250 |
50.4/250 |
|
STX-PDK176 |
570×570×180 |
6.52/8.68 |
ULPA |
8.3/170 |
14.2/250 |
STX-PDK179 |
1170×570×180 |
14.29/19.03 |
18.3/170 |
31.2/250 |
|
STX-PDK182 |
600×600×180 |
7.33/9.75 |
9.4/170 |
15.9/250 |
|
STX-PDK185 |
1210×600×180 |
15.71/20.91 |
20.2/170 |
34.3/250 |
|
建议面风速:标准风速:0.85m/s 高风速:1.25m/s FU风速:0.35m/s |
我公司可根据用户场所要求,定制非标产品,欢迎致电选购!
成交方式:1、默认支付宝交易,2、无支付宝用户可先打款然后发货。
收货注意事项:
请各位顾客收货(签收)之前,必先检查货物是否有损(需拆封检查)(特别是数量的核对),如有数量不对,我公司可以要求快递公司索赔!如不经仔细检查贸然签收,造成的后果一概自负!请大家千万注意!并请买家一定要亲自签收(代收造成的后果一律自负),收到货时如有任何问题,请您咨询我们的客服人员,我们一定会尽力解决你们的问题!